Port City’s comprehensive array of forming equipment includes some of the largest brakes and plate rolls in the Midwest. Our extensive capabilities can accommodate virtually any rolling and braking requirement imaginable, from small, thin sheet metal parts to large cylinders and transitions, to angle rolling of structural steels. In addition, our state-of-the-art software allows us to cut many different transitions including concentric and eccentric cones, rectangle to round transitions, elbows, reducing elbows, mitered cylinders and more.
Brake Bay
| MODEL | TONNAGE | LENGTH |
|---|---|---|
| 2017 Accurpress Accel 125024 | 1250 | 24' bed distance between the housing = 240" |
| 2014 Trumpf 5085 | 94 | 87" bed distance between the housing = 69" |
| 2013 Trumpf 5230 | 253 | 10.0' bed distance between the housing = 106.25" |
| 2002 Trumpf V130 | 130 | 10.0' bed distance between the housing = 106.25" |
| 1999 Cincinnati CB 230 | 230 | 12.0' bed distance between the housing = 126.5" |
| 1974 Cincinnati 600 | 600 | 13.5' bed distance between the housing = 125.75"" |
Roll Bay
| MODEL | ADDITIONAL INFORMATION |
|---|---|
| 2015 Faccin HEL 3137 | 10' x 1" x 24" id |
| 2012 Faccin HAV 3170 | Variable Geometry |
| 2008 Bertsch AR-60 (Angle Roll) | 6 x 6 x 5/8 leg In, 6 x 6 x 3/4 leg out |
| 2005 Bertsch | 10' x .75" x 35" id |
| 2004 Bertsch | 4' x .25" x 2' id |
| 1982 Pull max | 10' x .625" x 4' id |